
Remote-Control CommandsGPS and Assisted GPS
89Operating Manual 1171.5248.12 ─ 15
Example:
BB:GPS:NAV:ALM:TOEP?
queries the time of almanac.
Response: 589824
the value is returned in seconds. Counting starts at 0.00 a.m. on
Sunday of the GPS week.
Usage: Query only
[:SOURce<hw>]:BB:GPS:NAVigation:DATA <Data>
Determines the data source for the navigation information.
Note:Arbitrary data are supported only in "Generic" mode.
Parameters:
<Data> ZERO | ONE | PATTern | PN9 | PN11 | PN15 | PN16 | PN20 |
PN21 | PN23 | DLISt | RNData | USER
RNData
Real navigation data provided by an almanac file is used. The file
is loaded with command
SOURce:BB:GPS:NAVigation:ALMananc.
DLISt
A data list is used. The data list is selected with the command
[:SOURce<hw>]:BB:GPS:NAVigation:DATA:DSELect.
PNxx
The pseudo-random sequence generator is used as the data
source. Different random sequence lengths can be selected.
ZERO | ONE
Internal 0 and 1 data is used
PATTern
Internal data is used The bit pattern for the data is defined by the
command [:SOURce<hw>]:BB:GPS:NAVigation:DATA:
PATTern.
*RST:
RNData
Example:
BB:GPS:NAV:DATA PATT
selects as the data source for the data fields of burst 0, the bit
pattern defined with the following command.
BB:GPS:NAV:DATA:PATT #H3F,8
defines the bit pattern.
[:SOURce<hw>]:BB:GPS:NAVigation:DATA:DSELect <Dselect>
Selects the data list for the DLISt data source selection.
The lists are stored as files with the fixed file extensions *.dm_iqd in a directory of the
user's choice. The directory applicable to the following commands is defined with the
command MMEMory:CDIR. To access the files in this directory, you only have to give the
file name, without the path and the file extension.
Satellites Configuration and Satellites Signal Settings
Comments to this Manuals